Textron Bell 212 - Daily Inspection (Special)

BHT-212-MM-1
5-00-00
15 NOV 2018 Rev. 16 Page 107Export Classification C, ECCN EAR99
SPECIAL INSPECTIONS
5-17. DAILY INSPECTION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
Chapter 62 MAIN ROTOR HUB GRIP 204-011-121-009
— Detailed Visual Inspection
1. For 204-011-121-009 main rotor grip, inspect grip barrels
both leading and trailing sides for evidence of hairline cracks
(Figure 5-4).
NOTE
The following inspection is required for main rotor
grips 204-011-121-009 with 15000 hours or more
Time In Service (TIS).
ASB 212-14-150 2. Visually inspect the outboard face and edges of the two
drag brace attachment lugs without removing the drag brace
attachment hardware (Figure 5-4). If crack is found, remove the
grip from service.
TAIL FIN
— Inspect
1. Helicopters modified by TB 212-91-138 — If
TB 212-88-104 has not been incorporated, inspect right tail fin
skin for cracks.