BHT-212-MM-1
5-00-00
Page 86 Rev. 14 26 JUN 2013
Export Classification C, ECCN EAR99
Chapter 76 ENGINE FUEL AND POWER CONTROLS
1. Engine control linkages for looseness, lost motion, chafing,
damage, and security of attachment.
2. Bellcranks, mounts, and jackshafts.
3. Check controls for smooth movement through full travel
ranges.
Chapter 96 POWER DIODES
Perform functional check of power diodes.
Chapter 32 LANDING GEAR SYSTEM
1. Landing gear skid shoes for excessive wear, cracks,
damage, corrosion, and security of attachment.
2. Torque check crosstube to skid tube saddle bolts.
3. Torque check forward and aft crosstube support fittings
U-bolts 80 to 100 inch-pounds (9.0 to 11.3 Nm).
4. Torque check ground handling wheel attachment eyebolts
on skid tubes 40 to 58 foot-pounds (54 to 79 Nm). Eyebolts that
rotate prior to reaching 40 foot-pounds (54 Nm) shall be
removed and inspected for evidence of bending. No bending is
permitted.
Chapter 26 FIRE DETECTION SYSTEM
— General Visual Inspection
1. Engine fire detection elements for condition and security.
TAILBOOM
Chapter 53 1. Tailboom structure:
a. Tailboom exterior structure for corrosion and damage.
b. Tailboom interior structure for corrosion and damage.
5-13. 300 HOURS — PART B (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
