BHT-212-MM-1
5-00-00
Page 132 Rev. 14 26 JUN 2013
Export Classification C, ECCN EAR99
1. Visually inspect bearing for indications of lubricant
depletion, metal contamination, and bearing for roughness
when rotated by hand. Rough bearing or metal contamination is
cause for immediate replacement.
HELICOPTERS MODIFIED BY TB 212-91-138
TB 212-76-18
TB 212-86-92
TB 212-91-132
If Technical Bulletins 212-76-18, 212-86-92 and 212-91-132
have not been incorporated, the following listed inspection is
mandatory.
1. Inspect lift beam caps for cracks.
2. Inspect L/H spar cap, fin for cracks.
3. Inspect lift link fitting for cracks.
5-25. EACH 50 HOURS OF COMPONENT OPERATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
