BHT-212-MM-1
5-00-00
Page 212 Rev. 14 26 JUN 2013
Export Classification C, ECCN EAR99
4. When overtorque has exceeded 112% perform the
following:
a. Return the following components to an overhaul facility
for overhaul evaluation.
Component removal record of dynamic components
shall reflect overtorque as reason for removal.
Include amount of overtorque and duration, if known.
(1) Transmission.
(2) Main driveshaft.
(3) Main rotor hub.
(4) Mast.
(5) Perform thorough visual inspection of other
components outlined in step 2.
b. Remove fifth mount bolts and remove fifth mount.
Perform a thorough inspection of bolts and fifth mount support.
Check for bent bolts and bent fifth mount support. Check for bolt
hole alignment between transmission and fifth mount support.
5-53. AFTER OVERTORQUE (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
