BHT-212-MM-1
5-00-00
26 JUN 2013 Rev. 14 Page 23
Export Classification C, ECCN EAR99
CAUSE OF ANY DISCOLORATION SHALL BE
DETERMINED AND CORRECTED PRIOR TO NEXT
FLIGHT.
4. Flexible couplings and surrounding areas for grease
leakage, damage, corrosion, and evidence of overheat as
indicated by TEMP-PLATES or coupling discoloration. A change
in color of one or more of the red bordered TEMP-PLATE dots
from white/off-white to black indicates an overheat condition and
may require replacement of both outer and inner couplings
(step 5).
5. Overheat TEMP-PLATES for condition and security.
TEMP-PLATES must not show evidence of over temperature
indication, deterioration, debonding, or excessive discoloration of
the epoxy overcoating.
Chapter 65 INTERMEDIATE GEARBOX
— Detailed Visual Inspection
1. Gearbox assembly for security, condition, corrosion,
damage, and oil leaking.
5-8. DAILY INSPECTION — PART A (CONT)
DATA
REFERENCE
INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
