BHT-212-MM-1
5-00-00
26 JUN 2013 Rev. 14 Page 41
Export Classification C, ECCN EAR99
Chapter 65 TAIL ROTOR DRIVESHAFT
1. Hanger assemblies for cracks at mounting ears, corrosion,
and security of attachment.
2. Hanger supports for condition and security of attachment.
3. Driveshaft sections and attaching hardware for condition
and security.
a. Condition of clamps for tail rotor driveshaft coupling to
gearbox couplings (90° apart).
b. Inspect clamps for cracks in or near the bolt hole lugs.
Chapter 65 INTERMEDIATE GEARBOX
1. Inspect chip detector for debris. If metallic particles are
found, determine and correct cause.
2. Clean chip detector.
3. Test chip detector electrical circuit.
Chapter 67 ELEVATOR
— Detailed Visual Inspection
1. Elevators for security, cracks, damage, loose or missing
rivets, and corrosion.
2. Check elevator attachment lugs at each end of elevator
horn for cracks and security of attachment. Check elevator horn
to elevator spar attaching bolts and surrounding joints for cracks
and security of attachment.
5-9. 100 HOURS/12 CALENDAR MONTHS — PART A (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
