en-18
4 SPECIFICATIONS
4.3 MACHINE SPECIFICATION_____________________________________________
Frame construction:Welded tubular steel chassis.
Cutting unit drive:Direct Drive hydrostatic reel drive pump, bi-directional hydraulic gear motor with reel control
and Backlap valves.
Transmission:Variable displacement hydrostatic pump with low speed high torque wheel motors
.
Speeds:
Cutting:0 - 6 km/h ( 0 - 3.7 mph ) Forward
0 - 3 km/h ( 0 - 1.9 mph ) Reverse
Transport: 0 - 12 km/h ( 0 - 7.5 mph ) Forward
0 - 3 km/h ( 0 - 1.9 mph ) Reverse
Steering:Hydrostatic power steering 2.5 turns lock to lock, with 330mm (13 inches) dia steering wheel.
Ground pressure:1 kg/cm² (14 psi) (Dependent on tyre pressures and accessories fitted)
Brakes: Hydrostatic braking with 152mm (6 inches) Caliper disc parking brakes on front wheels.
Battery: Exide 093 (SAE 500) 12volt
TYRE PRESSURE
Product
Front Wheel Rear Wheel
Tyre Size Tyre Type Tyre Pressure Tyre Size Tyre Type Tyre Pressure
GP400 20 x 10.00 - 10 OTR Smooth
0.7 bar
(10 psi)
20 x 10.00 - 10 OTR Smooth
0.7 bar
(10 psi)
To Next Page
Loading...
Need help?
General
