EasyManuals Logo

Textron JACOBSEN GP400 User Manual

Textron JACOBSEN GP400
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
8 MAINTENANCE & LUBRICATION
en-59
8.4 ENGINE OIL CHANGE- GASOLINE ______________________________________
Change engine oil.
1 After first warming up the engine remove the drain
plug and drain all the oil from the crankcase sump.
2 Clean plug and replace.
3 Remove the filler cap (1) and refill with fresh oil up to
the maximum level on the dipstick (2).
See Specification for oil grade and amount.
4 Replace filler cap securely.
NOTICE: DO NOT overfill. Engine overheating and damage
may result.
8.5 ENGINE OIL FILTER- GASOLINE
Change Engine Oil Filter
1. Drain engine oil and remove oil filter.
2. Before installing new filter, lightly oil filter gasket with
fresh, clean oil.
3. Screw filter on by hand until gasket contacts filter
head. Tighten 1/2 to 3/4 turn more.
4. Add fresh oil. Fill to FULL line on dipstick.
5. Start and run engine at idle and check for leaks.
6. Stop engine, leave for 15 minutes, re-check oil level. Add oil if required.
CAUTION
Contact With Engine Oil Can Damage Your
Skin. Use Gloves When Working With Engine
Oil. If You Come In Contact With Engine Oil,
Wash It Off Immediately.
CAUTION
Dispose Of Used Engine Oil In Accordance
With Local Regulations
1
1. Filler Cap
2. Dipstick
1. Drain Plug
A. Oil Filter

Table of Contents

Other manuals for Textron JACOBSEN GP400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Textron JACOBSEN GP400 and is the answer not in the manual?

Textron JACOBSEN GP400 Specifications

General IconGeneral
BrandTextron
ModelJACOBSEN GP400
CategoryLawn Mower
LanguageEnglish

Related product manuals