Textron JACOBSEN GP400 User Manual

en-54
8 MAINTENANCE & LUBRICATION
8.1 MAINTENANCE AND LUBRICATION CHART ______________________________
GASOLINE MAINTENANCE AND LUBRICATION CHART
Interval Item
First 5-8 hours
 Change Engine Oil.
Daily
10 hours
 Check Engine Oil Level.
 Check Safety Interlock System.
 Check Hydraulic Fluid Level.
 Check for Hydraulic Leaks.
 Check Tyre Pressure.
 Check Oil Cooler Screen.
 Check Oil Cooler Fins.
 Check Bedknife & reel Blades.
Every 25 hours
 Check & Clean Air Filter Element*.
First 50 hours
 Change Hydraulic Oil Filter.
Weekly
Every 50 hours
 Change Engine Oil.
 Check for Loose Components.
 Check Engine Bay For Debris.
 Check Battery Condition.
Every 100 hours
 Change Engine Oil Filter.
Every 200 hours
 Change Inline Fuel Filter.
Every 250 hours
 Check & adjust Engine Valve Clearance
 Change Hydraulic Oil & Filters
End of season
Every 1000 hours
 Check Parking Brake Operation.
 Check Brake pads.
 Drain & Clean Fuel Tank
Lubricate all Grease fittings weekly
A = Lift Arm Pivot, B =Cutting Unit Pivot, C = Cutting Unit Bearing Housing, D = Steering Ram Ball Joint,
(see diagram)
* Check more often in dirty conditions
IMPORTANT
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures

Textron JACOBSEN GP400 Specifications

General

Brand	Textron
Model	JACOBSEN GP400
Category	Lawn Mower
Language	English