en-39
6 CONTROLS
6.7 FREE WHEEL________________________________________________________
1. To push the machine, disengage the parking brake
2. Turn screw (A) located on the underside of the
transmission pump 180º counterclockwise. Set the
steering wheel so that the rear wheel is pointing
straight ahead.
3. After pushing the machine, return the screw (A) on
the pump to its operating position.
WARNING
THE FREE WHEEL FACILITY IS FOR
RECOVERY PURPOSES ONLY.
Do Not Tow The Machine For More Than A
Few Metres, Or Allow The Machine To Free
Wheel Down Slopes Even When Unloading
Down Ramps.
To Next Page
Loading...
