Textron JACOBSEN GP400 User Manual

en-56
8 MAINTENANCE & LUBRICATION
DIESEL MAINTENANCE AND LUBRICATION CHART
Interval Item
First 50 hours
 Change Engine Oil & Filter.
 Check Fan Belt Tension.
 Change Hydraulic Oil Filter.
Daily
10 hours
 Check Engine Oil Level.
 Check Safety Interlock System.
 Check Engine Coolant Level
 Check Hydraulic Fluid Level
 Check Tyre Pressure.
 Check Air Filter Tell Tail Indicator*.
 Check for Hydraulic Leaks.
 Check Oil Cooler Screen.
 Check Oil Cooler Fins.
 Check Bedknife & reel Blades.
Weekly Every 50 hours
 Check for Loose Components.
 Check Fan Belt Tension.
 Check Engine Bay For Debris.
 Check Battery Condition.
Every 100 hours
 Change Engine Oil Filter.
 Check Fuel Filter For Water Contamination.
Every 200 hours
 Change Engine Oil.
 Change Inline Fuel Filter.
Every 250 hours
 Change Hydraulic Oil & Filters.
Every 400 hours
 Change Air Filter Element*.
 Change Fuel Filter Element.
End of season
Every 1000 hours
 Check Parking Brake Operation.
 Check Brake pads.
 Drain & Clean Fuel Tank
 Drain & Replace Engine Coolant
Lubricate all Grease fittings weekly
A = Lift Arm Pivot, B =Cutting Unit Pivot, C = Cutting Unit Bearing Housing, D = Steering Ram Ball Joint, (see
diagram)
* Check more often in dirty conditions
IMPORTANT
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures

Textron JACOBSEN GP400 Specifications

General

Brand	Textron
Model	JACOBSEN GP400
Category	Lawn Mower
Language	English