Textron JACOBSEN GP400 User Manual

en-21
SPECIFICATIONS 4
4.7 CUTTING UNIT SPECIFICATION_________________________________________
NOTE These cutting units are designed to cut grass of maximum height 12mm (15/32 in) down to the available
height of cut range, removing no more than 1mm (3/64 in) to 2mm (5/64 in) with each pass.
4.8 CUTTING PERFORMANCE _____________________________________________
7 Blade 9 Blade 11 Blade 15 Blade Verticut
Construction Fabricated steel construction
Reel Length
559mm (22
in)
559mm (22
in)
559mm (22
in)
559mm (22
in)
559mm (22
in)
Number of Knives 7 9 11 15 N/A
Number of Blades N/A N/A N/A N/A 26
Reel Diameter (New) 127mm (5 in) 127mm (5 in) 127mm (5 in) 127mm (5 in) N/A
Minimum Reel Diame-
ter
(Before Replacement)
117.5mm
(4.6 in)
117.5mm
(4.6 in)
117.5mm
(4.6 in)
117.5mm
(4.6 in)
N/A
Height of Cut True-
Set™ Reel (Standard
Blade)
1.6mm - 11.1mm (1/16 in - 7/16 in)
Height of Cut Classic
XP™ Reel (Standard
Blade)
2.5mm - 16mm (0.1 in - 0.63 in)
Height of Cut Classic
XP™ Reel (Tourna-
ment Blade)
2mm - 16mm (0.78 in - 0.63 in)
Bedknife to Reel
adjustment TrueSet™
Reel
Micro-adjusters
Bedknife to Reel
adjustment Classic
XP™ Reel
Opposed Set Screw
Rolls (Smooth &
Grooved)
50 mm (2 in) Diameter
Height of Cut Adjust-
ment TrueSet™ Reel
& Classic XP™ Reel
Screw adjusters on front roll
Transmission By hydraulic motor direct to reel.
Maximum Reel Speed
at Maximum PTO
Speed
2200rpm
Frequency of Cut
@ 2200rpm reel speed
Clip rate
@ 2200rpm reel speed
Blades mm/kph inches/mph
Cuts/metre
@ 6.04 kph
Cuts/yard
@ 3.74mph
7 1.247 0.079 41 37
8 0.963 0.061 52 48
11 0.789 0.050 64 59
15 0.584 0.037 87 80

Textron JACOBSEN GP400 Specifications

General

Brand	Textron
Model	JACOBSEN GP400
Category	Lawn Mower
Language	English