en-100
12 SPECIFICATIONS
12.3 MACHINE SPECIFICATION _____________________________________________
Frame construction: Heavy duty steel chassis with box section frame rails.
Cutter Deck Drive: Seven individual hydraulic motors with self lubricating integral bearings.
Transmission: Hydrostatic closed loop parallel cross series SureTrac system. Variable displacement
piston pump. Front high torque fixed displacement piston wheel motors. Full time auto
4WD forward, on demand in reverse.,
Speeds:
Cutting: 0 - 12 km/h (0 - 7.5 mph) Forward
0 - 6.4 km/h (0 - 4 mph) Reverse
Transport: 0 - 25 km/h (0 - 15.5 mph) Forward
0 - 6.4 km/h (0 - 4 mph) Reverse
Steering: Q-AMP
®
variable rate hydrostatic powered equal displacement cylinders to rear wheels.
Ground pressure: Depends on the tyre pressures and the accessories installed.
Brakes: Hydrostatic braking with wet disc parking brakes on the front wheels.
Battery: BBMS 678 80-capacity 20 Amp Hours 540A
Road Lights: Maximum current draw 2 Amp
Work Lights Maximum current draw 2 Amp
Cab Climate Control:
Technical data
Air conditioning system
Heating Performance 6.0 kW
Cooling performance 4.5 kW
Refrigerant R 134A
Recommended refrigerant level 800 g
Operating voltage 12 V
Power consumption, clutch max.49W
Refrigerant Oil 135 cc
Refrigerant Oil - in the compressor 50 cc
To Next Page
Loading...
