en-36
6 OPERATION
6.1 BEFORE YOU OPERATE, FOR THE FIRST TIME ____________________________
• Read the Safety Instructions.
• Check and adjust the tyre pressures. If necessary, see section 8.1 Specification.
• If necessary, add Diesel fuel to the tank.
• Check the engine oil level. If the oil level is not correct, fill the tank to the correct level.
• Check the radiator coolant level. If the coolant level is not correct, fill the tank to the correct level (use
50% anti-freeze solution).
• Make sure you understand the information contained in the previous sections.
CAUTION
Inspect the machine every day. Make sure the Engine Is Turned Off And All Fluids Are Cold. Lower The
Cutter Equipment To The Ground, Engage the Parking Brake, Stop the Engine And Remove the
Ignition Key.
To Next Page
Loading...
