EasyManua.ls Logo

Thales ADS-B - Technical Characteristics

Thales ADS-B
282 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AS 680/682
Description, Operation and Maintenance System Description
ADS−B
1−5Ed. 10.07
1.3 TECHNICAL CHARACTERISTICS
1.3.1 Dimensions and Weight
AS 680 basic system
SPU (HxWxD); weight 19", 3HU; 133x482x250 mm; approx. 7.1 kg
SM (HxWxD); weight 19", 1HU; 43x482x250 mm; approx. 1.0 kg
AS 682 cabinet, fully equipped, (HxWxD); weight 19", 24HU; 1200x600x600 mm; approx. 150 kg
SPU (HxWxD); weight (2x) 19", 3HU;133x482x250 mm; approx. 7.1 kg
SM (HxWxD)/weight 19", 1HU; 43x482x250 mm; approx. 1.0 kg
Data Switch (HxWxD); weight 19", 1HU; 43x482x180 mm; approx. 1.5 kg
UPS, basic (HxWxD); weight (2x) 19", 2HU; 86x444x410 mm; approx. 19 kg
UPS, extension (HxWxD); weight (2x) 19", 2HU; 86x444x410 mm; approx. 25 kg
1.3.2 Peripheral Equipment
RX antenna, omnidirectional (H,); weight max. 3420 mm, 60 mm; approx. 26 kg max.
Antenna Amplifier Unit (AAU) (HxWxD); weight 280x180x105 mm; approx. 4 kg
AAU support and cover (HxWxD); weight 300x255x220; approx. 5 kg
GPS antenna, (HxW); weight (2x) 60x100 mm; approx. 0.3 kg
1.3.3 Power Supply
SPU
AC voltage input (AC/DC converter option) 100 to 240 VAC, 50/60 Hz, single phase
DC voltage input (DC/DC converter option) nom. 24 VDC, 18 to 36 VDC, max. 4.5 A
Power consumption approx. 55 VA
Site Monitor
AC voltage input via plug−in mains supply 100 to 240 VAC, 50/60 Hz (DC out 24 V)
Power consumption approx. 5 VA
DC voltage input nom. 24 VDC, 20 to 28 VDC, max. 1 A
Data Switch
AC voltage input 100 to 240 VAC, 50/60 Hz, single phase
DC intern 5 V, max. 8 A
UPS type RS 1000 with 1 battery extension
AC voltage input / max. current 160 to 276 VAC, 50 Hz, single phase / 6.0 A
AC voltage output 208/220/230/240 VAC / 50 Hz
Power rating approx. 1000 VA (700 W)
Batteries 3x 12V, 7Ah
Battery extension 1
Typical battery time (battery mode) in [min] 53 (100 % load), 122 (50 % load)
1.3.4 Environmental Conditions
Ambient temperature
Operation indoor , +10 to +40 °C
(SPU, Data Switch, SM, UPS)
Operation outdoor equipment (antennas) −40 to +70 °C
Transport −55 to +70 °C
Relative humidity
indoor max. 90%, non condensing
outdoor max. 95% (−10 to +39 °C); max. 50% (40 to 70 °C)
non operation and transport up to 100 % with condensation

Table of Contents