11
Hard Disk Trays
Each of the N5200PRO’s hard disk trays has a lock, a latch, and two LED
indicators:
Hard Disk Trays
Item Description
Lock • Use the lock to physically secure the hard disk to the unit
Latch • Use to open and remove or close and secure the tray
HDD Power LED • Solid blue: hard disk is powered on
HDD Access/Error
LED
• Blinking green: system is accessing data on the hard disk
• Blinking red: a hard disk error has occurred
Rear Panel (N5200B PRO)
The Thecus N5200B PRO’s rear panel features ports and connectors.
N5200B PRO Back Panel
Item Description
eSATA Port • eSATA port for high-speed storage expansion
USB Port • USB 2.0 port for compatible USB devices, such as digital
cameras, USB disks, and USB printers
USB Port (target) • For connecting the N5200 to your PC as a mass storage device
LAN Port • LAN port that can be used for connection sharing
WAN Port • WAN port for connecting to an Ethernet network through a
switch or router
Power Switch • Switch for power supply
System Fan • System fan that exhausts heat from the unit
Power Connector • Connect the included power cords to these connectors
Serial Port • This port is for factory use only
To Next Page
Loading...