47
System Logs
Item Description
Truncate All Log File Clear all log files.
|<< < > >>| Use the forward ( > >>| ) and backward ( |<< < ) buttons
to browse the log pages.
INFO Provides all log information including warning messages and
error messages.
WARN Shows all warning messages and error messages.
ERROR Shows only error messages.
GO Specify the number of lines per page and press Go.
Ascending Shows logs by date in ascending order.
Descending Shows logs by date in descending order.
Download All Log File Export all logs to an external file.
Time and Date Settings
From the System menu, choose the Time
item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You
can also elect to synchronize the system
time on the N5200PRO with an NTP
(Network Time Protocol) Server. You
can change any of these items and press
Apply to confirm your settings.
See the following table for a detailed
description of each item:
Time
Item Description
Date Sets the system date.
Time Sets the system time.
Time Zone Sets the system time zone.
NTP Server Select Yes to allow the N5200PRO to synchronize with the NTP
server shown below.
Select Manually to allow the N5200PRO to synchronize with an
NTP server of your choice.
Select No to not have the N5200PRO to synchronize with an NTP
server.
WARNING
If an NTP server is selected, please make sure your N5200PRO’s network has been
setup to access the NTP server.
To Next Page
Loading...
Need help?
General
