36
File System Check
The File System Check allows you to
perform a check on the integrity of your
disks’ file system. Under the Storage menu,
click Filesystm Check and the File
System Check window appears.
To perform a file system check, begin by
selecting the desired RAID volumes by
clicking on their respective checkboxes.
Then, click Apply to begin the file system
check.
Descriptions of each field are below:
File System Check
Item Description
RAID ID ID of the current RAID volume.
Disks Disks included in the current RAID volume.
Status Status of the current RAID volume.
Data Capacity Used / Total capacity of the current RAID volume.
Last Check Time Last time a file system check was performed.
Apply Click Apply to perform the file system check on selected drives.
To Next Page
Loading...
Need help?
General
