40
WAN LAN Exchange
The N5200PRO is equipped with both WAN
and LAN ports. The WAN LAN Exchange
function allows you to exchange the
functionality of these ports directly through
the Web User Interface.
From the Network menu, choose the WAN
LAN Exchange item, and the WAN LAN
Exchange Support screen appears. Choose
Enable or Disable, and click Apply to save
your changes. Click Cancel to exit without
saving.
Web Services Configuration
From the Network menu, choose the
Service item, and the Web Service screen
appears. This screen displays the service
support parameters of the system. You can
change any of these items and press Apply
to confirm your settings. A description of
each item follows:
Web Service
Item Description
HTTP (WebDisk)
Support
Enable or disable WebDisk support. Enter the port number if this
option is enabled.
HTTPs (Secure
WebDisk) Support
Enable or disable secure WebDisk support. Enter the port if this
option is enabled.
SMB/CIFS Enable or Disable SMB/CIFS protocol for Windows, Apple, Unix
drive mapping.
UPnP Enable or disable Universal Plug and Play protocol. UPnP helps to
find the IP address of the N5200PRO.
NOTE
• Disable HTTP support and Enable
Secure HTTP support to guarantee
secure access.
• In some environments, due to
security concerns, you may wish to
disable SMB/CIFS as a precaution
against computer viruses.
NOTE
The IP Segment of WLAN, WAN and LAN should not overlap.
NOTE
Users should obey the international RF regulatory rules as they set up the wireless
RF channel on the N5200PRO. The RF operating channels for different regions
have been specified as following. Thecus has no responsibility for users attempting
to violate the international RF regulation.
11 N. America
14 Japan
13 Europe (ETSI)
2 Spain
4
France
To Next Page
Loading...
Need help?
General
