61
4. When MAC OS X has connected to the N5200PRO successfully, an icon
representing the folder will appear on the MAC OS X desktop. You can
access the folder by double clicking on the icon.
Mapping the N5200PRO as an iSCSI Drive
With the N5200PRO, you are able to map it as an iSCSI drive. With iSCSI, you
can remotely access the N5200PRO at great speeds, as if it were installed as a
local drive in your computer.
To do this, simply follow the steps below:
Windows 2000/XP
1. First, download the iSCSI Initiator from the Microsoft website
(
http://www.microsoft.com). You can find this software by entering iSCSI
Initiator into the search box on their homepage.
2. Once the download is complete, install the iSCSI Initiator by double-
clicking the EXE file. You may be presented with the following security
warning. Click Run to continue.
3. You will now install the iSCSI Initiator using the Setup Wizard. Click Next
to continue.
To Next Page
Loading...
Need help?
General
