32
The Create iSCSI Volume screen appears.
Create iSCSI Volume
Item Description
RAID ID ID of current RAID volume.
Unused Percentage and amount of unused space on current RAID
volume.
Allocation Percentage and amount of space allocated to Target USB
volume.
iSCSI Target Service Enable or Disable the iSCSI Target service.
Authentication You may choose CHAP authentication or choose None.
Target Name Name of the iSCSI Target
Year Select the current year from the dropdown.
Month Select the current month from the dropdown.
Username Enter a username.
Password Enter a password.
Password Confirm Reenter the chosen password
IQN The iSCSI Qualified Name
Initiator Information Shows the name and status of iSCSI initiators logged on
the system
OK Click OK to save changes.
Back Click Back to exit without saving.
2. Designate the percentage to be allocated from the Allocation dropdown.
3. Enable the iSCSI Target Service by selecting Enable.
4. Choose to enable CHAP authentication or choose None.
5. Choose the current year from the Year dropdown.
6. Choose the current month from the Month dropdown.
7. If you’ve enabled CHAP authentication, enter a username and a
password. Confirm your chosen password be reentering it in the
Password Confirm box.
8. Click OK to create the iSCSI volume.
To Next Page
Loading...
Need help?
General
