Thermal Dynamics A60 CUTMASTER Service Manual

CUTMASTER A60
GENERAL INFORMATION 14 Manual 0-4982
1.07 Declaration of Conformity
Manufacturer: Thermal Dynamics Corporation
Address: 82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (2006/95 EC) and to
the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the "EMC Directive" (European Council Directive 89/336/
EEC) and to the National legislation for the enforcement of this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
*UL(UnderwritersLaboratory)rating94VOammabilitytestingforallprinted-circuitboardsused.
*Forenvironmentswithincreasedhazardofelectricalshock,PowerSuppliesbearingthe'S' mark conform to EN50192 when used in conjunction with
hand torches with exposed cutting tips, if equipped with properly installed standoff guides.
*Extensiveproductdesignvericationisconductedatthemanufacturingfacilityaspartoftheroutinedesignandmanufacturingprocess.Thisisto
ensuretheproductissafe,whenusedaccordingtoinstructionsinthismanualandrelatedindustrystandards,andperformsasspecied.Rigorous
testingisincorporatedintothemanufacturingprocesstoensurethemanufacturedproductmeetsorexceedsalldesignspecications.
Thermal Dynamics has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of manufacture.
Manufacturers responsible representative: Steve Ward
Operations Director
Thermadyne Europe
Europa Building
Chorley N Industrial Park
Chorley, Lancashire ,
England PR6 7BX

Thermal Dynamics A60 CUTMASTER Specifications

General

Brand	Thermal Dynamics
Model	A60 CUTMASTER
Category	Welding System
Language	English