CUTMASTER 40MM
Manual 0-5084 GENERAL INFORMATION
1-7
1.07 Declaration of Conformity
Declaration of Conformity
We Victor Technologies International Inc.
of 16052 Swingley Ridge Road
Suite 300
Chestereld, MO 63033 U.S.A.
in accordance with the following Directive(s):
•2006/95/EC The Low Voltage Directive
•2004/108/EC The Electromagnetic Compatibility (EMC) Directive
hereby declare that:
Equipment: Plasma Cutting Power Source
Model Name/Number: CutMaster 40MM
Market Release Date: January 20, 2012
is in conformity with the applicable requirements of the following harmonized standards:
• EN 60974-10:2007 Arc Welding Equipment - Part 10: Electromagnetic compatibility (EMC)
requirements
•EN 60974-1:2012 Arc Welding Equipment - Part 1: Welding power sources.
Classification: The equipment described in this document is Class A and intended for industrial use.
Manufacturer’s Authorized Representative
Steve Ward V.P. Europe and General Manager
Address:Victor Technologies International Inc.
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Date: May 22, 2014
Steve Ward
(Full Name)
V.P. Europe and General Manager
(Position)
(Signature)
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is
provided by the public low-voltage supply system. There may be potential difficulties in ensuring elec-
tromagnetic compatibility in those locations, due to conducted as well as radiated disturbances.
To Next Page
Loading...
Need help?
General
