Thermal Dynamics CutMaster 40MM User Manual

CUTMASTER 40MM
INSTALLATION Manual 0-5084
3T-2
A-02585
Workpiece
Square
Pinch Block
Assembly
Mechanical Torch Set - Up
3. The proper torch parts (shield cup, tip, start car-
tridge, and electrode) must be installed for the
type of operation. Refer to Section 4T.07, Torch
Parts Selection for details.

Thermal Dynamics CutMaster 40MM Specifications

General

Brand	Thermal Dynamics
Model	CutMaster 40MM
Category	Welding System
Language	English