3. Load a method from the instrument Library or from disk.
Press the Load Method function key and follow the on screen
instructions. To save the method to the Library or disk, press the Save
Method function key and follow the on screen instructions.
4. Clear the beams or insert suitable references and close the lid of
sample compartment.
5. Press Zero to zero the instrument.
6. Open sample compartment lid and insert the samples.
7. Close the lid of the sample compartment and press Run.
8. Press the View Results function key to see the Fixed Results Table.
From this page, it is possible to save the results to the instrument
Library or to disk.
Thermo Fisher Scientific Evolution 300 and Evolution 600 User Guide 47
To Next Page
Loading...
