Save a method:
When a Save Method function key is selected, the Save dialog opens with
the Filename highlighted ready for entry.
Parameter Function
Filename
Allows the user to enter a file name. When filename has
been entered, press the Accept function key.*
SmartStart
Allows the user to place this method in the SmartStart
menu when the SmartStart menu is set as the home page.
Method Name Allows the user to enter method name (optional).
Drive
Allows the user to select whether the method is saved to
disk or instrument Library.
* Press the Save function key (available after a filename has been entered) to save, or Clear to exit
without saving.
Scan application
Follow these steps to run a Scan application:
1. Start the Scan application.
To do this, highlight Scan on the Main Menu page and press Enter.
The Scan method page will open. The menu may contain more items
than are shown in the example, depending on the way the software is
configured and which accessories are installed.
Thermo Fisher Scientific Evolution 300 and Evolution 600 User Guide 41
To Next Page
Loading...
