Thermo Scientific TSX Series User Manual

16 | Start Up Ultra Low Temperature Freezers
Standby Mode
There is a standby button on the front of the unit. When pressed and held for approximately 3 seconds, the user is prompted
to confirm that the unit should be placed in standby mode. Upon confirmation, the unit enters standby mode. The refrigeration
system shuts down and the unit will not cool while in standby mode. To exit standby mode and restore normal operation, the
standby power button must be pressed and held for approximately 1 second.
Figure 27. Standby Button
Standby Button

Thermo Scientific TSX Series Specifications

General

Type	Laboratory Refrigerator
Cooling Type	Forced air cooling
Defrost Type	Automatic
Door Type	Solid or glass door options
Controller Type	Microprocessor
Certifications/Compliance	UL, CE
Energy Consumption	Varies by model; refer to product specification sheet
Voltage	115V
Exterior Dimensions (H x W x D)	Varies by model; refer to product specification sheet
Interior Dimensions (H x W x D)	Varies by model; refer to product specification sheet
Weight	Varies by model; refer to product specification sheet
Shelves	Adjustable shelves
Energy Efficiency	Energy Star certified models available