To Next PageTo Next Page
Need help?Do you have a question about the THOMSON RD1002 and is the answer not in the manual?
General| HDTV Compatible | No |
|---|---|
| Tuner Type | Digital |
| Frequency Range (FM) | 87.5 - 108 MHz |
| Frequency Range (DAB) | 174 - 240 MHz |
| Display | LCD |
| Audio Output | Stereo |
| Type | Receiver |
| Connectors | Headphone Jack |
| Supported Bands | DAB, FM |
| Power Supply | AC 230V |
Details the physical installation process of the unit into a standard 19" rack.
Provides a concise guide to get the unit operational by selecting input, Source ID, and outputs.
Details the quad input satellite receiver card for DVB-S and DVB-S2 signals.
Overview of the dual MPEG over IP card for receiving and transmitting IP streams.
Guides on selecting the active input and configuring backup input settings for redundancy.
Details how to configure the 8VSB/QAM receiver card's input settings, channel, and modulation.
Instructions for configuring the serial TS input/output card, including input type selection.
How to configure the dual COFDM receiver card's source, center frequency, and bandwidth.
Configuration steps for the DVB-S/S2 receiver card, including source, DVB mode, and advanced features.
Setup for CAM decryption, including operation modes and PID selection for decryption.
Configuration of the MPEG over IP card, including IP settings, group selection, and transmit options.
Configuration of network settings (IP address, Subnet Mask, Gateway) for remote management.
Steps to log in to the unit's remote web client using admin or user credentials.
Guides on setting up input sources, services, and PSIP information via the web interface.
How to perform a soft reset on the unit via the web client to resolve issues.
