Why does my THOMSON Receiver switch off after 3 hours?
If your receiver switches off after 3 hours of inactivity, it's likely because the power-saving Auto Standby function is activated. You can switch this function off in the settings if you prefer.
What to do if the external USB HDD does not start on my THOMSON Receiver?
If your external USB HDD isn't starting, it might be drawing too much power. Try connecting an extra power supply adapter to your USB HDD device.
What to do if my THOMSON Receiver is behaving unexpectedly?
If your receiver is behaving unexpectedly or erratically, especially after a power issue or software update, try loading the factory settings from the System menu.
Why is the display on my THOMSON Receiver not lighting up?
If the display on the front panel isn't lighting up, first check that the mains cable is properly plugged into the power socket. If it is, the mains fuse might be blown, so check the mains fuse as well.
What to do if my THOMSON Receiver has no sound or picture and the front panel shows a red light?
If you have no sound or picture and the front panel shows a red light, the receiver is likely in standby mode. Press the On/Standby button to turn it on.
What can cause my THOMSON Receiver to have too strong a signal?
If the signal is too strong, it could be because the dish is oversized. To resolve this, connect a signal attenuator to the LNB input.
Essential safety guidelines for operating the receiver and its accessories.
Recommendations and steps for setting up the receiver and related equipment.
Details the buttons and functions of the remote control for operating the receiver.
Step-by-step guide for connecting the receiver to a TV via HDMI.
Step-by-step guide for connecting the receiver to a TV via SCART.
Initial setup process for the receiver, including channel scanning.
Configuration of satellite dish and LNB settings for optimal reception.
Guidance on fine-tuning antenna alignment for maximum signal quality.
Process for automatically scanning for available satellite channels.
Description of the automatic channel search and storage process.
Using the EPG to view programme schedules and book recordings.
Accessing installation-related settings like satellite configuration and scanning.
Detailed configuration for satellite dish, LNB, and transponder settings.
Performing an automatic scan for channels after configuring satellite settings.
Procedures for updating receiver software and backing up settings.
General| Aspect ratio | 4:3, 16:9 |
|---|---|
| Signal source | Satellite |
| Supported video modes | 1080i, 1080p, 576i, 720p |
| Digital signal format system | DVB-S2 |
| Personal Video Recorder (PVR) included | No |
| Tuner type | Digital |
| Product color | Black, Silver |
| Interactive TV | - |
| Number of tuners | 1 tuner(s) |
| Channels quantity | 4000 channels |
| Audio output channels | - channels |
| Electronic Program Guide (EPG) | Yes |
| Digital Satellite Equipment Control (DiSEqC) | 1.0, 1.1, 1.2, Sat-CR |
| RF ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Power consumption (typical) | 10 W |
Weight and Dimensions| Depth | 170 mm |
|---|---|
| Width | 220 mm |
| Height | 45 mm |
| Weight | 530 g |
To Next Page
