THOMSON THT740 - 7.1 Channel Installation

MAIN MENU
P9
English
6.2 Info Banner
While watching TV, you can press at any time to access information about the current channel and
event*. In this mode it is possible to use tu to display programme information of other channels without
the necessity to switch. Press twice for extended EPG details about the current channel. Within the
program information use pq or P + / P to scroll. If you press tu you can change between Now and
Next.
*Event information is displayed when available. Availability depends on the broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press AUDIO in viewing mode. A list of available audio streams will now be displayed. Use pq to select a
stream and confirm with OK. The audio channel as stereo, mix, left and right can be selected with tu.
6.4 Videotext
To access the available Videotext, press the TEXT button in viewing mode and use the 0~9 buttons
to enter the number of the page you wish to see. In case of availability you can also use the COLOUR
BUTTONS of the remote control for direct access, as indicated on the bottom of the screen.
Use pq to select one page, use tu to select subpages. By pressing OK you can change the
transparency. Each time there will be another level and after the fifth time the initial transparency is
achieved. Press  to get back to viewing mode. After leaving Videotext, the transparency level is set to the
initial level again.
6.5 Subtitles
Some channels support a choice of subtitle languages. Press SUB in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with pq and press OK to confirm. Press  to
leave without making changes.*
*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not available, they can be activated via Videotext
(ifavailable).
6.6 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules and
programme information and to mark events/movies for wakeup of the receiver. To access the EPG, press
EPG in viewing mode. Use pq to select a channel and tu to select an event. Press OK to display
detailed information of the selected event. Use 9 to quit the detailed information screen. Press the RED or
GREEN buttons to see and select another day. Press the YELLOW button to set a timer for a selected event.
Refer to section 7.3.4 for details of the timer function.
NOTE: Availability of EPG data depends on broadcast.
7.0 MAIN MENU
The main menu gives you access to Installation, Channels, Settings, Multimedia and Network functions. To
access the main menu, press MENU in viewing mode. Throughout the main menu, 9 can be used to get
back to the previous screen and  to quit.
7.1 Installation of channels
Use tu to select the main menu item Installation.
Use pq to highlight the submenu of choice and press OK to select. These submenus are available:
Manual Search, Auto Search, Information, Factory Settings and Freenet Menu
7.1.1 Manual Search
This menu allows you to search for channels at a specific Frequency or Channel number.