P12
MAIN MENU
difference is that in the Radio manager there is no video information, so it will always display the radio
background on the preview screen.
7.2.3 Programme Information
This menu item opens the Electronic Programme Guide (EPG), for details please see chapter 6.6.
7.3 Settings
Use tu to select Settings in the main menu. Use pq to highlight the submenu of choice and press OK
to select.
7.3.1 Language
This menu allows you to set up your language preferences.
OSD Language: Use tu to select the language for the On Screen Display.
1st Audio language: Use tu to select the audio language you like to hear as first priority, if available.
2nd Audio language: Use tu to select a language that will be played when the language selected at
1st Audio language isn’t available.
Subtitle Type: Select the preferred subtitle type to be displayed automatically. Select Normal or
Hard of Hearing*
Subtitle Display: Select On to activate displaying of subtitles.
1st Subtitle Language: Use tu to select the first preferred subtitle language.
2nd Subtitle Language: Use tu to select the second preferred subtitle language.
*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not available, they might be activated via Videotext.
7.3.2 Output Settings
Use this menu to adjust your desired output settings according to your TV and/or home cinema.
The following settings are available:
HDMI Resolution: Select the video resolution of your TV screen. The options are: Auto (automatic
detection of video resolution offered to the receiver) and manual selections 480i,
576i up to 1080p Please use a setting that matches the specifications of your TV.
Selection above 576i is only applicable to the HDMI output.
Aspect Ratio: Select the aspect ratio of your TV. The options are: 4:3 for 4:3screen and 16:9 for
16:9 TV sets.
Aspect conversion: Select the preferred conversion method. The options are: PanScan: displays
16:9widescreen broadcasts in full screen on a 4:3 TV. Letterbox: black bars on top
and bottom of the picture on a 4:3 TV. Combined: shows a mix in-between. Ignore:
shows as it is.
Connection: Select the connection to your TV set. Select HDMI or TV SCART. If the connection
type HDMI is selected, then only the CVBS signal will be available on the TV
SCART.
OSD Transparency: To set the OSD transparency from Off ~ 50% with 10% steps.
OSD Timeout: Sets the time after which on screen banners and messages disappear. The range
is 3~10 seconds.
HDMI Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or transfer
Dolby® Digital/Dolby® Digital Plus* audio to the TV via HDMI or to a home cinema
set.
SPDIF Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or transfer
Dolby® Digital/Dolby® audio to a home cinema set through coaxial S/PDIF. (Not
Dolby® Digital Plus.)
To Next Page
Loading...
