THOMSON THT740 - Page 17

MAIN MENU
P13
English
Audio Description: AD. Set this option to On if you like to have support of an audio track that
describes the content on screen. Useful for the visual impaired.
Audio Description Volume offset:
Select the volume from the AD audio track.
*Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 General Settings
This menu allows you to manage the basic system settings of your receiver.
It allows you to adjust following items: Auto Standby, Auto Channel Update and Logical Channel Numbering.
7.3.3.1 Auto Standby
Auto Standby is a feature that helps you reducing power consumption.
Press pq to highlight the Auto Standby item and use tu to change between 1Hour up to 6 Hours. The
receiver will switch into standby-mode if it doesn’t receive any command of the remote control during this
time. Set it to Off to deactivate the automatic standby function.
7.3.3.2 Auto Channel Update
It this item is set to On, the unit will check if new channels are available before it is switching to standby.
At the next switch on, you will be informed if new channels are on air and prompted to start an auto scan.
This way you are always up-to-date with the channel list. If you select Off, the automatic channel update
function is deactivated and the Delete function can be used in the channel list.
7.3.3.3 Logical Channel Numbering
This receiver supports Logical Channel Numbering (LCN). This means that the channel numbers are
operator defined and automatically sorted into the main channel list. Sorting in the main list is therefore
not possible. The Move function is marked grey and cannot be selected. By default this function is set to
Off and you are free to sort the channels in the main channel list. If the broadcaster supports this function
you can activate it by setting it from Off to On. In this case the receiver will delete all current channels and
favourite lists and start a new automatic scan process. Please confirm the displayed message with OK to
proceed.
7.3.4 Parental Control
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also
create a new PIN code. Use pq to select Parental Control from the Settings menu and press OK to
proceed. You will be asked to enter your PIN code. (DEFAULT PIN: 0000)
Menu Lock: Locks the installation menu. You can set the Menu Lock to On or Off.
Program Lock: Switch all programme/channels lock to On or Off. If the lock is set in the TV or
Radio Manager menu. You can select the lock separately for every channel which
you like to protect it with a PIN code.
Program Lock age: Choose between: Off Lock None, Lock All, 4years and up to 18 years. Channels
with a parental rating above the chosen age will be protected with a PIN code (if
available in your local broadcast.)
PIN Code Change: Press OK to enter the menu.
Old PIN Code: Enter your current PIN code (4digits).
New PIN Code: Enter your new PIN code (4digits) you’d like to use.
(Make a note of it.)
Confirm: Re-enter your new PIN code to confirm. Press OK to end and save the change.
7.3.5 Time Settings
Here you can set up your time zone for clock/time in your menu and system.