THOMSON THT82 - Instant Recording; Main Menu Navigation; Programme Menu Management

English
9
at the Mode option. Conrm with OK. Use the COLOUR BUTTONS to add, edit or delete an entry
manually. Recordings will be stored in the Multimedia>PVR>HBPVR folder on your HDD drive.
See chapter 7.2 for more detailed information.
Note: Availability of EPG data depends on broadcast.
6.8 Instant Recording
Your new receiver allows you to make an instant recording of the programme you are watching.
Simply press 4 to start the recording.
During the recording a recording sign will be shown on the upper left of your TV screen. To stop the
recording, press 3. Select Yes and press OK again to stop the recording.
* Please connect a USB storage device with sufcient free space before you start a recording.
Recordings will be stored in the Multimedia>PVR>HBPVR folder on your HDD drive.
6.9 Sleep
Press SLEEP repeatedly to select an automatic switch off time, at which the unit will go to standby.
Default is OFF.
7.0 MAIN MENU
The main menu gives you access to settings and multimedia functions. To access the main menu,
press MENU in viewing mode. The main menu consists of the following sub menus: Programme,
Picture, Channel Search, Time, Option, System and USB. Throughout the main menu, MENU or EXIT
can be used to get back to the previous screen. Use t u and OK to select or to change settings. Use
the button suggestions at the bottom of the screen available for certain functions. For some menu
items a valid Password it is necessary to access the item. Default Password is 1234.
7.1 Programme
Programme Edit
To access this menu, you must enter a valid Password. The procedures are equal for the DVBT TV List
and DVBT Radio List. Use t u to change between the TV and Radio lists.
NOTE: For successful editing of channel list, switch Off LCN function. See ch. 7.3
Moving channels
Use pq to select a channel and press RED to select it to be moved. Now you can move the selected
channel up or down inside the channel list by using pq. When the channel is on the position of your
choice, press OK again. The channel is now xed on its new position. When all changes have been
made, press EXIT. A saving banner will pop up.
Skipping channels
Channels marked with Skip will be skipped when zapping channels with the pq buttons. The
channels will still be available from the channel list.
Use pq to select a channel and press GREEN to mark or unmark it for skipping. Channels set for
skipping will be marked with the SKIP_IMG symbol. When all changes have been made, press EXIT. A
Saving banner will pop up.
Locking channels
Locked channels can only be watched after entering the password. (DEFAULT PASSWORD: 1234)
Press pq to select a channel and press YELLOW to lock or unlock it. You are asked to enter the PIN
code. Locked channels will be marked with the
 symbol. Locking/unlocking multiple channels in one
session is possible. When all changes have been made, press EXIT. A Saving banner will pop up.