THOMSON THT82 - System Settings

12
7.7 Option
Set up the options for languages.
OSD Language Use t u to select the language for the On-Screen Display.
Subtitle Language Set your preference for the subtitle language priority, if available in
broadcast.
Audio Language Set your preference for the audio language priority, if available in broadcast.
Digital Audio Options are: O, PCM, RAW HDMI On, RAW HDMI O
PCM: All audio will be down mixed to a Stereo format on HDMI and S/PDIF
outputs.
RAW HDMI On: Raw audio information will be passed on to the HDMI
output, without down mixing to PCM Stereo, to be passed on to and
processed by a digital amplier or home-theatre set to produce multi-
channel audio.
RAW HDMI O No audio will be forwarded to the outputs.
Audio Description AD. Useful for the visual impaired. If you like to have support of an audio
track that describes the content on screen, select the volume from the AD
audio track. Default is O.
NOTE: Audio Description depends on the broadcaster inserting such an
accompanying audio track.
7.8 System
Setup some system own features for maintenance and protection.
Parental Guidance Programmes with a Parental Guidance Rating can be blocked from viewing
and opened only with a Password. To setup this feature, enter your password
rst. Then select an age, above which the channel must be protected.
Options are: O, 1 to 18. Default is O.
Set password To set another password than the default one, enter the old 4-digit
password rst, then enter a new password and conrm it, by entering it
again.
Restore Factory Default Reset your receiver to the default factory settings. Sometimes useful if the
unit suddenly behaves in an unexpected manner, e.g. after a power failure.
Select System then Restore Factory Default in the main menu and press OK
to select. Enter your password or the DEFAULT password: 1234 and press
OK to conrm. Note: This option will delete all your channels, Favourite lists
and settings. The receiver will reboot and start with the initial Installation
menu.
Information This submenu shows receiver specic information such as hardware and
software version. Please have the Information screen on hand when you call
our hotline. The person who answers your call might ask for the information
given in this screen.
Software Update This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software le (unzipped) in the root directory
of your USB storage device (HDD, memory receiver etc.) and connect the
device to the USB port of the receiver. First a message box will appear that a
USB device is found. Then go to the System menu and select the Software
Update option. Select the correct le in the list. Press OK to start update.
When ready, the unit will reboot automatically.
Recall List If set to On, a list of last watched channels will be displayed in viewing
mode, when the RECALL button on the remote control is pressed. Choose
the channel to go back to and press OK. If set to O, the RECALL button will
instantly return to the previous watched channel.