THOMSON THT82 - USB Media Playback

English
13
7.9 USB
Multimedia
This function allows playback of different kind of les from the connected USB storage device.
Select Music and press OK to playback MP3 les from your folders. Select Photo and press OK to
view your favourite pictures in JPG format. Select Movie and press OK to enter to play a number of
video formats. Select PVR and press OK, and select the HBPVR folder to show the recordings you've
made. The unit supports USB HDD devices with FAT32 format. However, it is possible to use already
on a PC formatted NTFS HDD device. Make sure your USB device is formatted correctly. Use the
On-Screen button suggestions and the multimedia buttons like RECALL (Return), u, 3 and 2 on the
remote control to work inside the multi media player.
Photo Congure Setup your preferences for Photo viewing. Press u and photos will be
shown in an automatic slide mode.
Slide Time Time between advancing to the next photo.
Slide Mode Many different modes can be used, for dissolving to the next photo, dened
by a number. Also, it is possible to select Random order to view the photos.
Movie Congure For Subtitle use in the movie player, setup the features here.
Subtitle Specic Select either normal, big or small for Subtitle size.
Subtitle BG Select the preferred colour of the Subtitle Background.
Subtitle FontColor Select the preferred colour of the Subtitle characters.
PVR Congure For this option to work, you must have a USB device connected.
Record Device If your USB device should have more than 1 partition, select the one to use.
Timeshift Size Select the amount of free space, to be assigned to the Timeshift function.
Default is 1GB, which would account for around 1 hour of video, depending
on the video format and resolution.
NOTE: Below this setting information is shown about the current partition or
device.
Format The use of a USB Hard Disk Drive, already formatted in a PC with FAT32 or
NTFS is recommended.
WARNING: The format function will delete all data and information from your USB
device or selected partition. Manufacturer will not take any responsibility
for damaged or lost data on the USB device.
If you have multiple partitions on your storage device, select the partition you would like to format
and press OK to continue. A conrmation banner will now be displayed. Press OK to start formatting
(or EXIT to cancel it). The format procedure will take some time, depending on the size of the used
storage device. At the end of the process, the “Formatting is complete” message will appear. Press
EXIT twice to exit the menu.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline or send email to our Support via mythomson.com. Do NOT
try to open or disassemble the receiver. It may cause a dangerous situation and warranty will be void.