TSC 80e TRANSFER SWITCH CONTROLLER
PM091 Rev 0 09/01/21 Thomson Technology
TABLE OF CONTENTS
1. INTRODUCTION 1
1.1. PRODUCT REVISION HISTORY 1
1.2. GENERAL INFORMATION 2
1.3. NOTES TO TRANSFER SWITCH INSTALLER 2
1.3.1. SYSTEM VOLTAGE 2
1.3.2. SYSTEM PHASING - HIGH LEG DELTA SYSTEMS 3
1.3.3. REMOTE START CONTACT FIELD WIRING 4
1.3.4. DIELECTRIC TESTING 4
2. DESCRIPTION 5
2.1. LEXAN FACEPLATE 5
2.2. PRINTED CIRCUIT BOARD 7
2.2.1. TERMINAL BLOCKS 8
2.2.2. DIAGNOSTIC LED’S 8
2.3. TSC 80e CONTROLLER FEATURES 9
2.4. APPLICATION INFORMATION 11
2.4.1. AC VOLTAGE SENSING INPUT 11
2.4.2. AC CONTROL POWER INPUT 13
2.4.3. OUTPUTS 13
3. OPERATING INSTRUCTIONS 14
3.1. AUTOMATIC SEQUENCE OF OPERATION 14
3.1.1. NORMAL OPERATION 14
3.1.2. ABNORMAL OPERATION 15
3.2. TEST MODES 17
3.2.1. UTILITY POWER FAIL SIMULATION (LOAD TEST) 17
3.2.2. AUTOMATIC PLANT EXERCISE TEST 18
3.2.3. FOUR FUNCTION REMOTE TEST (FTS4 OPTION) 19
3.2.4. REMOTE TEST 20
3.3. TRANSFER FAIL FAULT RESET 20
3.4. LAMP TEST 21
3.5. TIMER BYPASS 21
3.6. TSC 80e LCD DISPLAY OPERATION 22
3.6.1. LCD DISPLAY SCREENS 22
3.6.2. LCD DISPLAY MODE OPERATION 25
3.6.3. SYSTEM STATISTICS 25
To Next Page
Loading...
Need help?
General
