© 2013 Thorlabs GmbH132
DCx Cameras
4.2.1.4 Image Memory Sequences
When you are capturing and displaying frame sequences (e.g. live display), it is advisable to provide appropriate
image memory sequences. The uc480 driver offers a set of easy-to-use features for this purpose. For example, the
system automatically cycles through the specified sequence of image memories and can generate an event
when it reaches the end of a sequence cycle.
Before you can use a memory sequence, you have to allocate the relevant image memories (see Allocating image
memory ).
Adds image memory to the sequence list.
Deletes the entire sequence list.
Determines the image memory currently used for the sequence.
Makes the indicated image memory the active memory.
Protects the sequence image memory from being overwritten.
Releases the sequence image memory for overwriting.
141
130
156
179
226
337
289
354