© 2013 Thorlabs GmbH
4 Programming (SDK)
353
4.3.99 is_StopLiveVideo
Syntax
INT is_StopLiveVideo (HIDS hCam, INT Wait)
Description
is_StopLiveVideo() stops live mode or cancels a hardware triggered image capture in case the exposure has
not yet started.
Input parameters
The function waits until the image save is complete.
The function returns immediately. Digitizing the image is
completed in the background.
Digitizing is stopped immediately.
Return values
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
Related functions
is_FreezeVideo()
is_CaptureVideo()
is_SetDisplayMode()
223
177
322