© 2013 Thorlabs GmbH426
DCx Cameras
4.5.34 is_SetEdgeEnhancement
Syntax
INT is_SetEdgeEnhancement (HIDS hCam, INT nEnable)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the is_EdgeEnhancement()
function instead (see also Obsolete functions ).
is_SetEdgeEnhancement() enables a software edge filter. Due to Bayer format color conversion, the original
edges of a color image may easily become blurred. By enabling the digital edge filter, you can optimize edge
representation. This function causes a higher CPU load.
Input parameters
Disables the edge filter.
Enables strong edge enhancement.
Enables weaker edge enhancement.
Returns the current setting.
Return values
When used together with
IS_GET_EDGE_ENHANCEMENT
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
Function executed successfully
Related functions
is_SetColorMode()
is_SetColorConverter()
206 379
319
315