EasyManuals Logo

THORLABS DCU22 Series User Manual

THORLABS DCU22 Series
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #414 background imageLoading...
Page #414 background image
© 2013 Thorlabs GmbH412
DCx Cameras
4.5.26 is_SaveParameters
USB 2.0
USB 2.0
Syntax
INT is_SaveParameters (HIDS hCam, const IS_CHAR* pFilename)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the is_ParameterSet()
function instead (see also Obsolete functions ).
is_SaveParameters() saves the current camera parameters to an ini file or to the EEPROM of the camera. You
can load saved parameters using the is_LoadParameters() function. The uc480 parameter file section
in the appendix describes the structure of a uc480 ini file.
Input parameters
hCam
Camera handle
pFileName
Pointer to a filename You can either pass an absolute or a relative path. For
internal parameter sets, these are "\\cam\\set1" or "/cam/set1", or "\
\cam\\set2" or "/cam/set2", respectively.
If NULL is passed, the "Save as" dialog will be displayed..
You can save two parameter sets in the non-volatile EEPROM of the camera using specific filenames:
pFileName
"\\cam\\set1" or "/cam/set1"
Parameter set 1
"\\cam\\set2" or "/cam/set2"
Parameter set 2
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
IS_CRC_ERROR
A CRC error-correction problem occurred while reading
the settings.
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not match
the current camera model.
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration data.
IS_NOT_SUPPORTED
The camera model used here does not support this
function or setting.
IS_NULL_POINTER
Invalid array
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
292
379
398 504

Table of Contents

Other manuals for THORLABS DCU22 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCU22 Series and is the answer not in the manual?

THORLABS DCU22 Series Specifications

General IconGeneral
BrandTHORLABS
ModelDCU22 Series
CategorySecurity Camera
LanguageEnglish

Related product manuals