THORLABS DCU22 Series User Manual

© 2013 Thorlabs GmbH274
DCx Cameras
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
IS_CANT_OPEN_REGISTRY
Error opening a Windows registry key
IS_CANT_READ_REGISTRY
Error reading settings from the Windows registry
IS_CAPTURE_RUNNING
A capturing operation is in progress and must be
terminated before you can start another one.
IS_CRC_ERROR
A CRC error-correction problem occurred while reading
the settings.
IS_DEVICE_ALREADY_PAIRED
The device is already paired.
IS_DEVICE_NOT_COMPATIBLE
The device is not compatible to the drivers.
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not be
created.
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
IS_DR_LIBRARY_NOT_FOUND
The DirectRenderer library could not be found.
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
The configuration of the CPU idle has failed.
IS_FILE_WRITE_OPEN_ERROR
File cannot be opened for writing or reading.
IS_INCOMPATIBLE_SETTING
Because of other incompatible settings the function is
not possible.
IS_INVALID_BUFFER_SIZE
The image memory has an inappropriate size to store
the image in the desired format.
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not match
the current camera model.
IS_INVALID_CAPTURE_MODE
The function can not be executed in the current camera
operating mode (free run, trigger or standby).
IS_INVALID_DEVICE_ID
The device ID is invalid. Valid IDs start from 1 for USB
cameras.
IS_INVALID_EXPOSURE_TIME
This setting is not available for the currently set
exposure time.
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
IS_INVALID_PIXEL_CLOCK
This setting is not available for the currently set pixel
clock frequency.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
IS_NO_ACTIVE_IMG_MEM
No active image memory available. You must set the
memory to active using the is_SetImageMem()
function or create a sequence using the
is_AddToSequence() function.
IS_NO_IMAGE_MEM_ALLOCATED
The driver could not allocate memory.
IS_NO_IR_FILTER
No IR filter available
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration data.

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English