THORLABS ITC502 - Page 93

3.7 Error messages of the ITC5xx
ITC500 / page 85
[103, "Invalid text parameter"]
Category: Command Error
Possible reasons: ":SENS hhh". This parameter is not valid.
[109, "Wrong compound"]
Category: Command Error
Possible reason: ":ILD:ERR?". This combination is not allowed.
[110, "Unknown compound"]
Category: Command Error
Possible reason: ":ILD:XXX?". This compound is not known.
[111, "Wrong parameter"]
Category: Command Error
Possible reason: ":LASER CG". This compound is not valid for this command.
[190, "Parser buffer overflow"]
Category: Command Error
Possible reason: The string sent to the ITC5xx was too long for the parser.
[200, "Data out of range"]
Category: Execution Error
Possible reason: ":ILD:SET 10E+30" sent to the ITC5xx but this current is
much too high.
[300, "Hardware error"]
Category: Device Error
Possible reason: Many. Device must probably be maintained.
[301, "Software error"]
Category: Device Error
Possible reason: Unexpected error. Please contact Thorlabs.
[302, "Not implemented yet"]
Category: Device Error
Possible reason: Feature not enabled. Please contact Thorlabs.