Thuraya IP - Login Settings Screen; Wlan Configuration Screen; Creen Creen

22 ThurayaIP Satellite Modem User Guide
Note: If the SIM PIN code is incorrectly entered three times,
the SIM will be locked until the PUK (Pin Unlock Key) number is
entered. Consult your Service Provider if you do not have your
PUK number.
Change SIM PIN: If the SIM PIN is enabled, and you would like to change
the existing PIN, click this link. You will be required to enter the Old PIN,
the New PIN, and the New PIN again for confirmation.
Lock Upon SIM Change: When this setting is enabled, you must enter a
security code when the terminal powers up with a new SIM.
Restricted Administrative Access: When Restricted Administrative
Access is enabled, protected web pages can only be accessed after
you enter a username and password. The username is the fixed string
“admin” and the password is the security code.
Change Security Code: The security code is 12345 when shipped from
the factory. To change an existing Security Code, click this link. You will
be required to enter the Old Code, the New Code, and the New Code
again for confirmation. Click Save to store the changes.
Note: If you forget the security code you will need to consult
with your service provider.
L OGIN S ETTINGS S CREEN
Utilize the login screen only if you have been given the necessary
information from your Service Provider.
Service Provider Security: If this is enabled, you can enter a User Name
and Password for authentication between ThurayaIP and your Service
Provider. Your Service Provider will let you know if this step is required
and give you the necessary information.
User Name, Password, Confirm Password: You must enter the password
twice to ensure accuracy.
WLAN C ONFIGURATION S CREEN
The WLAN Configuration screen allows you to configure WLAN
characteristics, including enabling/disabling WLAN, setting a timer that
will force WLAN to power down if no host connects within the timeout,
and setting up security.