26
ThurayaIP Satellite Modem User Guide
Streaming Alert: When enabled, the ThurayaIP will
beep twice every 30 seconds after 10 minutes of
streaming inactivity (no transmit or receive data).
You can cancel the alert by pressing an iMMI
button. The terminal will also flash the LCD
backlight every 10 seconds during any streaming
QoS session unless the backlight is set to off.
There is also a streaming timer embedded within the Modem Status box
that appears on the upper left hand corner of the web page.
M2M Configuration: When enabled, the ThurayaIP will monitor the
transmit and receive traffic. If traffic is not seen on either direction for
the timeout duration then the terminal will automatically reboot to
ensure it stays online. This mechanism is useful to ensure continuous
operation from unattended sites.
M2M Monitor: This is the timeout setting for the M2M feature.
Power Up Profile: You can select the power up profile from a drop
down list, including Standard and three customizable streaming profiles.
Each streaming profile can be customized by name, multimedia mode,
fixed rate mode, transmit rate, and receive rate.
Select the Save button to implement your modifications.
To Next Page
Loading...
