Need help?Do you have a question about the timecode systems UltraSync BLUE and is the answer not in the manual?
General| Weight | 50 grams |
|---|---|
| Dimensions | 54 mm x 44 mm x 17 mm |
| Connectors | BNC, USB-C |
| Wireless Technology | Bluetooth |
| Timecode Standard | SMPTE |
| Sync Inputs | 1 x BNC |
| Sync Outputs | 1 x BNC |
| Frame Rates | 24, 25, 29.97, 30 |
| Power Supply | Internal rechargeable battery |
Step-by-step guide for powering the device on and off, including confirmations.
Explanation of the device's OLED screen and physical buttons for navigation and settings.
Describes the colour-coded LED indicator for device status and feedback.
Instructions on how to recharge the device's internal battery using the provided cable.
Guidance on attaching the device to other equipment using a Velcro strap.
Detailed specifications including dimensions, accuracy, frame rates, power, and range.
Steps to connect the UltraSync BLUE to smartphones, cameras, or sound recorders via Bluetooth.
Configuration of radio frequency channel and geographical region for device synchronization.
Selection of operational modes like Int Master RF TX, RF Slave, or Free Run.
Procedure to input and set the desired timecode values for the device.
Process for configuring the device's frame rate to match recording equipment.
Illustrates a network setup using multiple UltraSync BLUE devices for synchronization.
Describes integrating UltraSync BLUE with professional cameras, sound recorders, and other Timecode Systems products.
Configuration for using the UltraSync BLUE as a standalone timecode generator.
How to lock and unlock the device's menus to prevent unintended changes.
Adjusting the display's brightness level for optimal visibility.
Setting the duration before the screen automatically dims to save battery.
Adjusting the brightness of the device's status LED indicator.
Details of the information displayed on the device's primary status screen.
Locating the device's firmware and serial number for support.
Checking the status and signal strength of the Bluetooth connection.
Verifying the timecode and frame rate synchronization with other devices.
Steps to resolve issues where the select button does not function.
Troubleshooting steps for problems with the device not charging.
Diagnosing and resolving connection issues when the device is in slave mode.
Addressing scenarios where the slave device connects to an incorrect master.
Guide for updating the device's firmware using the USB updater app.
Performing a soft reset to recover from unresponsiveness without losing settings.
Guide for resetting the device to its original factory default configuration.
Details of the product warranty terms, coverage, and exclusions.
Information on how to register for an extended warranty period.
Statements regarding FCC and RF exposure compliance and regulations.
Official declaration of the product's compliance with relevant EU harmonization legislation.
Important safety instructions and guidelines for the proper disposal of the device's battery.
To Next Page