timecode systems UltraSync BLUE - UltraSync BLUE not Responding to Select button; UltraSync BLUE Battery not Charging

UltraSync BLUE not Responding to Select button
In the unlikely event that your UltraSync BLUE does not display the
menu when you press the Select button, try a Reset (see page 51).
UltraSync BLUE Battery not Charging
If the UltraSync BLUE battery is not re-charging when you use a USB-
C charger:
1. Switch your UltraSync BLUE off (see Switch UltraSync BLUE On
and Off on page 8).
2. Check that the USB-C port on the UltraSync BLUE is clear. USB-
C ports can get clogged with lint from pockets or dirt and dust
from the environment.
3. Try using a different charger.
4. Try using a different cable.
If the problem persists, contact Timecode Systems for advice.
48 UltraSync BLUE User Guide