Restore Factory Settings
You can reset your UltraSync BLUE to its original state. This can be
useful if you want to start with a completely fresh UltraSync BLUE, for
example, when moving the UltraSync BLUE into another network.
Note: If you want to reset the UltraSync BLUE without losing
the existing settings, see Reset on page 51.
To restore the factory settings of your UltraSync BLUE:
1. Make sure your UltraSync BLUE is switched on (see Switch
UltraSync BLUE On and Off on page 8).
2. Press the Select button.
3. Choose Power and press Select.
4. Choose Factory Reset and press Select.
5. Choose the Confirm option and press Select (or choose Back to
return to the previous screen).
52 UltraSync BLUE User Guide
To Next Page
Loading...