TIPTEL 333 - Message Function and Absence Management

Message function
25
Message function
The message function allows a caller who knows the message code
to leave a message, even when your tiptel 333 is set to play a non-
recordable announcement. When your tiptel 333 is set to play a
recordable announcement, the message function gives the caller
the possibility to skip the announcement.
Instructions on how to configure your message code can be found
in the "Settings" section.
Call your tiptel 333 from
another phone.
Y
ou will hear the announcement.

Start input by pressing the
Star key.
The announcement will stop.
Enter the message code with
t
he telephone keypad. If you
make a mistake, you can go
back using the Star key, and
start again.
An electronic voice confirms
every single digit.

To accept the code that you
have entered, press the Hash
key.
The device will then prompt you
t
o speak. If an incorrect code has
been entered, your tiptel 333 will
switch off immediately.
Leave your message and
finally replace the receiver.
 The telephone from which you use the message function must
be set up for tone dialling (MFV).