Remote operation
31
Switching off the device remotely
Switching off the device
Press "
*
" then "0".
our tiptel 333 will disconnect
and will not accept any further
incoming calls.
Switching on the device remotely
Call your tiptel 333 from
another phone.
After 50 seconds, you will hear a
beep.
Enter the remote access
code using the telephone
keypad. Start your keypad
entry with "
*
" and confirm it
with "#".
our message will play back for
you to check. The device can
now be operated remotely (e.g.
o record a new announcement).
After you have left the remote
operation mode, your tiptel 333
will be switched on and will
accept incoming calls.
To Next Page
Loading...
