TIPTEL 333 - Page 31

Remote operation
30
Two-way communication function

Room monitoring
/
Intercom
Press "1".
The microphone will switch
on, and you will hear what is
happening near the tiptel 333.

Press "1" once more. The device will switch off the room
monitoring function. You will hear
anyone present near the tiptel 333
over the loudspeaker.
Programme switching function

 ... 
Changing to another an-
nouncement
Press "7" then "1" … "4",
depending on which
announcement you would
like to switch to.
The announcement selected will
play for you to check and confirm.
The device will play this message
for the next caller.
Altering your announcement

 ... 
Altering your announcement
Press "9" then "1" … "3",
depending on which
announcement you would
like to change.
Y
our tiptel 333 will prompt you to
speak.
Record the message.

For a recordable personalised
message: Press "8" after you
have finished speaking.
Y
our message will play back for
you to check. At the end, you will
hear one single beep.
o
r

For a non-recordable
announcement: Press "#" after
you have finished speaking.
Y
our message will play back for
you to check. At the end, you will
hear two beeps.